Réactifs et instruments pour l'immunologie, la biologie cellulaire et la biologie moléculaire.
 
> MBP146-78 [188343-77-3]

MBP146-78 [188343-77-3]

Imprimer Imprimer
Identifiez-vous

Référence HY-101525-5mg

Conditionnement : 5mg

Marque : MedChemExpress

Contactez votre distributeur local :


Téléphone : +1 850 650 7790

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 0.77 mg/mL (2.30 mM); Clear solution

    This protocol yields a clear solution of ≥ 0.77 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (7.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 0.77 mg/mL (2.30 mM); Clear solution

    This protocol yields a clear solution of ≥ 0.77 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (7.7 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
  • Protocol 3

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 0.77 mg/mL (2.30 mM); Clear solution

    This protocol yields a clear solution of ≥ 0.77 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (7.7 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
% 
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.

  • [1]. Nare B, et al. Evaluation of a cyclic GMP-dependent protein kinase inhibitor in treatment of murine toxoplasmosis: gamma interferon is required for efficacy. Antimicrob Agents Chemother. 2002 Feb;46(2):300-7.  [Content Brief]

To assess the toxicity of MBP146-78 to HFFs, cells are plated in 96-well plates at 1000/well and allowed to adhere overnight prior to addition of compound. Cultures are incubated for 5 days at 37°C in the presence of 5% CO2. Viability is assessed using the Cell-Titer 96 Aqueous One solution cell-proliferating assay.

MCE n'a pas confirmé de manière indépendante l'exactitude de ces méthodes. Ils sont pour référence seulement.

Mice: MBP146-78 is dissolved in water. MBP146-78 is administered in 100 μL doses by intraperitoneal injections starting 24 h after parasite inoculation. Mice are monitored twice daily for clinical evidence of toxoplasmosis and mortality throughout the experimental period.

MCE n'a pas confirmé de manière indépendante l'exactitude de ces méthodes. Ils sont pour référence seulement.

  • [1]. Nare B, et al. Evaluation of a cyclic GMP-dependent protein kinase inhibitor in treatment of murine toxoplasmosis: gamma interferon is required for efficacy. Antimicrob Agents Chemother. 2002 Feb;46(2):300-7.  [Content Brief]

  • [1]. Nare B, et al. Evaluation of a cyclic GMP-dependent protein kinase inhibitor in treatment of murine toxoplasmosis: gamma interferon is required for efficacy. Antimicrob Agents Chemother. 2002 Feb;46(2):300-7.

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.9813 mL 14.9067 mL 29.8134 mL 74.5334 mL
5 mM 0.5963 mL 2.9813 mL 5.9627 mL 14.9067 mL
10 mM 0.2981 mL 1.4907 mL 2.9813 mL 7.4533 mL
15 mM 0.1988 mL 0.9938 mL 1.9876 mL 4.9689 mL
20 mM 0.1491 mL 0.7453 mL 1.4907 mL 3.7267 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Anti-infection
  • Parasite
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

MBP146-78188343-77-3ParasiteInhibitorinhibitorinhibit

Vos produits récemment consultés:

Demande en ligne

Your information is safe with us. * Required Fields.

Bulk Inquiry

Inquiry Information

Nom du produit:
MBP146-78
Cat. No.:
HY-101525
Quantité:
MCE Japan Authorized Agent:

Avis client

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

Request for HNMR Report

We have received your request and will respond to you as soon as possible.