Réactifs et instruments pour l'immunologie, la biologie cellulaire et la biologie moléculaire.
 
> IPTG [367-93-1]

IPTG [367-93-1]

Imprimer Imprimer
Identifiez-vous

Référence HY-15921-1ml

Conditionnement : 10mM/1mL

Marque : MedChemExpress

Contactez votre distributeur local :


Téléphone : +1 850 650 7790

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (8.73 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.08 mg/mL (8.73 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
  • Protocol 3

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.08 mg/mL (8.73 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL Corn oil, and mix evenly.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 100 mg/mL (419.64 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).

  • [1]. Isopropyl β-D-1-thiogalactopyranoside

  • [1]. Isopropyl β-D-1-thiogalactopyranoside

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO / H2O 1 mM 4.1964 mL 20.9820 mL 41.9639 mL 104.9098 mL
5 mM 0.8393 mL 4.1964 mL 8.3928 mL 20.9820 mL
10 mM 0.4196 mL 2.0982 mL 4.1964 mL 10.4910 mL
15 mM 0.2798 mL 1.3988 mL 2.7976 mL 6.9940 mL
20 mM 0.2098 mL 1.0491 mL 2.0982 mL 5.2455 mL
25 mM 0.1679 mL 0.8393 mL 1.6786 mL 4.1964 mL
30 mM 0.1399 mL 0.6994 mL 1.3988 mL 3.4970 mL
40 mM 0.1049 mL 0.5245 mL 1.0491 mL 2.6227 mL
50 mM 0.0839 mL 0.4196 mL 0.8393 mL 2.0982 mL
60 mM 0.0699 mL 0.3497 mL 0.6994 mL 1.7485 mL
80 mM 0.0525 mL 0.2623 mL 0.5245 mL 1.3114 mL
100 mM 0.0420 mL 0.2098 mL 0.4196 mL 1.0491 mL

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Others
  • Biochemical Assay Reagents
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

IPTG367-93-1Isopropyl β-D-thiogalactosideBiochemical Assay ReagentsInhibitorinhibitorinhibit

Vos produits récemment consultés:

Demande en ligne

Your information is safe with us. * Required Fields.

Bulk Inquiry

Inquiry Information

Nom du produit:
IPTG
Cat. No.:
HY-15921
Quantité:
MCE Japan Authorized Agent:

Avis client

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

Request for HNMR Report

We have received your request and will respond to you as soon as possible.

Vous serez peut-être également intéressé par les produits suivants :



Référence
Description
Cond.
Prix HT